2: Please choose the cover thickness(Taper) from the drop down to the right:
Thicker foam provides better insulation in cooler climates and helps prevent evaporation of the water in arid climates. Thicker foam is more resistant to deterioration that occurs with normal use over time.
Standard 4" to
3 Payments of
$104 per month Delivery Included
Premium Classic Cover
Thick 5" to
3 Payments of
$117 per month Delivery Included
Ultima Classic Cover
Extra Thick 6"
to 4" Taper
3 Payments of
$134 per month
Deluxe Walk-on Cover
4" x 2" Tapered Foam with Fiberglass Sheets
3 Payments of
$220 per month
CHOOSE COVER TYPE
3: Please use drop down to select the color of
your hot tub cover. CHOOSE COVER COLOR
4: Please Select Skirt Length:
The skirt is the strip of vinyl that drapes from the bottom of the foam.
This measurement does not include the foam insert.
The skirt should be just long enough to cover the acrylic lip of the spa.
The skirt helps protect the acrylic lip from the elements, helps prevent heat loss and evaporation of the water.
SELECT SKIRT LENGTH:
A Skirt Length will be required, please select from the drop down menu above!
Additional upgrade charges will be added for any spa cover skirt longer than 6 inches.
A spa cover skirt is the portion of your
fabric that extends down from your cover bottom and overlaps the top
of your spa. Cover skirts help protect the acrylic part of your spa
from UV damage so it's important that they hang down enough to cover the
Your new cover will be made with 1 ˝ lb density virgin foam inserts. You can upgrade to 2 lb density virgin foam. Higher density foam is more rigid, more stable, increases heat retention and will provide increased resistance to water logging.
THE DELUXE WALKON COVER COMES WITH 3 INCH FOAM DENSITY
FOAM DENSITY:Provides Strength and Insulation.
6: Available Options:
The skirt flaps are extended at the hinge creating flaps in the hinge. You can choose to add either hinge pockets to seal the ends of the hinge or you can add a full length steam stopper that insulates the full length of the hinge to prevent heat loss and evaporation in the hinge.
INSULATED HINGES UPGRADE:
7: Vapor Proof Barrier Seal:
The foam inserts in your new spa cover are protected with a heat sealed vapor wrap. Over time, the vapor seal deteriorates allowing moisture to reach the foam making the cover very heavy. Our vapor seal upgrade shields the foam inserts from the negative effects of time and the chemicals used to maintain your water chemistry.
VAPOR PROOF BARRIER SEAL:
8: Add a Cover Lift:
Using a cover lift can help prolong the life of your spa cover. Cover lifts reduce wear and tear caused by improper removal and replacement of the spa cover. Using a cover lift eliminates the need to drop, drag, push and pull the spa cover into position. Adding a cover lift adds to ease of use and extends the life of your cover.
9: Tie Downs:
Every new spa cover includes four (4) locking tie downs. Each tie down is approximately 9 1/2" long including the attached clip. To secure all 4 sides, one tie down will be attached near each corner. We can't guarantee the attached clips will be the same size, exact placement, or that the tie downs will line up with your existing locks, so new locks and mounting hardware are included with your new cover.
10: Detached Adjustable Tie Down Straps:
Locking tie down straps that run across the top of your cover to help hold it securely in place. Tie Down Straps adjust from 6' to 12', and include a male clip on each end, 2 female locks and mounting hardware.
11: Shipping Insurance:
If your cover arrives and there is obvious damage that occurred in transit, you should refuse the cover and we will ship you a replacement. If you choose the Shipping Insurance Option when you order your cover, we will replace your cover if you find damage to the cover that was not visible at the time of delivery. Just call us within 24 hours of accepting the cover and we’ll take care of the rest.
Covers Concealed Damage you may not notice upon delivery.